メインコンテンツにスキップ

はじめに

This guide shows how to replace a speaker from the main array of a Sonos Playbase.

    • Turn the Playbase upside down so that the "Sonos Playbase" imprint is face up.

    • Remove the bottom panel with an Opening Tool by inserting underneath and prying upwards.

    • Melt the adhesive with an iOpener for ease of opening

    • Use a Metal Spudger if the plastic spudgers do not work.

    • Take care to avoid damaging the plastic or the device if using a metal spudger.

    • Remove the fourteen 11mm T-10 screws by turning counter-clockwise.

    • Remove the seven 44mm T-20 screws by turning counter-clockwise.

    • Remove the twenty-two 34mm T-20 screws by turning counter-clockwise.

    • Record where each screw belongs for easier reassembly.

    • Remove the metal plate with a Opening Tool by inserting underneath and prying upwards.

    • Use a metal spudger if plastic openers do not work.

    • Take care to avoid damaging the plastic or the device if using a metal spudger.

  1. Sonos Playbase A Speaker from the Main Array Replacement, Main Speaker Array: 手順 4、 2の画像 1 Sonos Playbase A Speaker from the Main Array Replacement, Main Speaker Array: 手順 4、 2の画像 2
  2. Sonos Playbase A Speaker from the Main Array Replacement: 手順 5、 2の画像 1 Sonos Playbase A Speaker from the Main Array Replacement: 手順 5、 2の画像 2
    • Remove the side speakers from the green printed circuit board (PCB) running along the top of the main speaker array by pinching and pulling out the connector.

    • See Recognizing & Disconnecting Cable Connectors for more information.

    • Remove the two 16mm T-20 screws located on both sides of the main speaker array by turning counter-clockwise.

  3. Sonos Playbase A Speaker from the Main Array Replacement: 手順 7、 1の画像 1
    • Remove the main speaker array by gripping it on both sides and pulling it out.

    • The array may require a significant amount of force to remove.

    • Use prying tools as necessary to remove the main speaker array if you are unsuccessful using your hands.

    • Do not to yank the array out too suddenly or too far as this may damage the device.

  4. Sonos Playbase A Speaker from the Main Array Replacement: 手順 8、 1の画像 1
    • Prop the removed main speaker array up on top of the main circuit board.

    • Remove the four 11mm T-10 screws from the individual speaker that needs replacement, by turning the screws counterclockwise.

  5. Sonos Playbase A Speaker from the Main Array Replacement: 手順 10、 1の画像 1
    • Remove the damaged speaker from the array socket, by grasping the speaker with one hand, the array with your other and pulling outward.

  6. Sonos Playbase A Speaker from the Main Array Replacement: 手順 11、 2の画像 1 Sonos Playbase A Speaker from the Main Array Replacement: 手順 11、 2の画像 2
終わりに

To reassemble your device, follow these instructions in reverse order.

George Slivka

メンバー登録日: 2018年10月08日

339 ポイント

3のガイドは作成済み

チーム

Cal Poly, Team S17-G2, White Fall 2018 Cal Poly, Team S17-G2, White Fall 2018人のメンバー

CPSU-WHITE-F18S17G2

4 メンバー

8のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 1

過去 7 日: 12

過去 30 日: 39

今までの合計 1,585