Sonos One Power Adapter Replacement

はじめに

This guide is for the replacement of the power receptacle for the Sonos One.

Important: Accessing the internals of the Sonos One will void the factory warranty and make the unit rejected for factory repair, even if warranty is expired.

必要な工具と部品

手順1 Protective Cover

Sonos One Power Adapter Replacement, Protective Cover: 手順 1、 3の画像 1

Sonos One Power Adapter Replacement, Protective Cover: 手順 1、 3の画像 2

Sonos One Power Adapter Replacement, Protective Cover: 手順 1、 3の画像 3

Disconnect all power cords.
Remove the rubber foot and plastic screw guard on the bottom of the device using a plastic opening tool.
Note: the rubber foot and plastic screw guard can be removed as one piece to make reassembly easier

編集

手順2

Sonos One Power Adapter Replacement: 手順 2、 3の画像 3

Remove the four 10mm Torx T10 screws from the bottom of the speaker.

編集

手順3

Remove the bottom cover by squeezing the protective cover slightly while pushing up with your fingers.

編集

手順4

Sonos One Power Adapter Replacement: 手順 4、 3の画像 3

The protective cover clip is very thin and deforms easily.
Remove the single 8mm Torx T10 screw and protective cover clip.

編集

手順5

Slide the protective cover upwards to remove.

編集

手順6 Control Panel & Microphone

Sonos One Power Adapter Replacement, Control Panel & Microphone: 手順 6、 3の画像 1

Sonos One Power Adapter Replacement, Control Panel & Microphone: 手順 6、 3の画像 2

Sonos One Power Adapter Replacement, Control Panel & Microphone: 手順 6、 3の画像 3

Use the pointed end of a spudger to remove the covers that hide the screws.
Remove the four 9mm Torx T8 screws from around the perimeter of the control panel.

編集

手順7

With the front of the unit facing you, lift the control panel up using your thumbs.
There's a ribbon cable attaching the control panel to the speaker so work slowly.

編集

手順8

Sonos One Power Adapter Replacement: 手順 8、 3の画像 3

Use a spudger to flip up the retaining flap on the control panel ribbon cable ZIF socket.
Pull the control panel ribbon cable out of its socket.

編集

手順9

Pull the control panel away from the speaker to separate.

編集

手順10 Power Adapter Receptacle

Sonos One Power Adapter Replacement, Power Adapter Receptacle: 手順 10、 3の画像 1

Sonos One Power Adapter Replacement, Power Adapter Receptacle: 手順 10、 3の画像 2

Sonos One Power Adapter Replacement, Power Adapter Receptacle: 手順 10、 3の画像 3

Remove the six 9mm Torx T8 screws from the motherboard panel.

編集

手順11

Using a plastic opening tool, separate the motherboard from the speaker.

編集

手順12

Sonos One Power Adapter Replacement: 手順 12、 3の画像 3

Using your thumb, disconnect the speaker cable from the motherboard.

編集

手順13

Sonos One Power Adapter Replacement: 手順 13、 3の画像 3

Disconnect the power adapter plug from the motherboard using your thumb.

編集

手順14

Sonos One Power Adapter Replacement: 手順 14、 3の画像 3

Using the pointed end of the spudger, disconnect the red, green, and yellow cables connecting the WiFi transmitter/receiver.

編集

手順15

Remove the motherboard panel from the speaker housing.

編集

手順16

Sonos One Power Adapter Replacement: 手順 16、 3の画像 3

The woofer is highly magnetic, making removal of the metal screws sometimes difficult.
Remove the two 9mm Torx T8 screws from the power adapter plug.
Remove the power adapter receptacle from its housing slot.