メインコンテンツにスキップ

Samsung Galaxy S7 Active Motherboard Replacement

必要な工具と部品

  1. Samsung Galaxy S7 Active Motherboard Replacement, Samsung Galaxy S7 Active Disassembly: 手順 1、 1の画像 1
    • Melt the adhesive on the screen by applying a blow dryer directly on the screen.

    • Your phone is hot, please do not touch it with your bare hand.

  2. Samsung Galaxy S7 Active Motherboard Replacement: 手順 2、 1の画像 1
    • Wedge the metal spudger in between the screen and the frame to begin separating them.

    • It would be easier to separate the screen from the sealing adhesive on the frame if you with more than one metal spudger.

    • Your phone might no longer be watertight after you reassemble it.

  3. Samsung Galaxy S7 Active Motherboard Replacement: 手順 3、 2の画像 1 Samsung Galaxy S7 Active Motherboard Replacement: 手順 3、 2の画像 2
    • Slide the metal spudger around the phone at least once.

    • It would be easier to slide your metal spudger if you apply the blow dryer to where you are currently sliding.

  4. Samsung Galaxy S7 Active Motherboard Replacement: 手順 4、 1の画像 1
    • Lift the screen up with your hands.

    • Please wash your hands thoroughly with hot water and soap after you finish.

  5. Samsung Galaxy S7 Active Motherboard Replacement, Battery: 手順 5、 1の画像 1
    • Use a Phillips #000 screwdriver to remove a single screw.

  6. Samsung Galaxy S7 Active Motherboard Replacement: 手順 6、 1の画像 1
    • Use tweezers to remove the small plastic cover you just unscrewed.

  7. Samsung Galaxy S7 Active Motherboard Replacement: 手順 7、 1の画像 1
    • Use tweezers to remove the other small plastic cover.

  8. Samsung Galaxy S7 Active Motherboard Replacement: 手順 8、 1の画像 1
    • Use a Phillips head #000 to take out the eleven screws marked in the photo.

  9. Samsung Galaxy S7 Active Motherboard Replacement: 手順 9、 1の画像 1
    • Use tweezers to disconnect the marked pieces from the motherboard.

  10. Samsung Galaxy S7 Active Motherboard Replacement: 手順 10、 1の画像 1
    • Use tweezers to take out the middle button and its connection to the motherboard.

  11. Samsung Galaxy S7 Active Motherboard Replacement: 手順 11、 3の画像 1 Samsung Galaxy S7 Active Motherboard Replacement: 手順 11、 3の画像 2 Samsung Galaxy S7 Active Motherboard Replacement: 手順 11、 3の画像 3
    • Use a metal spudger to pull the mid frame and battery off of the motherboard.

  12. Samsung Galaxy S7 Active Motherboard Replacement: 手順 12、 2の画像 1 Samsung Galaxy S7 Active Motherboard Replacement: 手順 12、 2の画像 2
    • Use a spudger to remove the battery from the midframe.

    • To install a new battery and adhesive, follow this guide.

  13. Samsung Galaxy S7 Active Motherboard Replacement, Rear Camera: 手順 13、 1の画像 1
    • Use tweezers to disconnect the front camera from the battery.

    • The connector should unsnap similar to a lego piece.

  14. Samsung Galaxy S7 Active Motherboard Replacement, Motherboard: 手順 14、 1の画像 1
    • Use a Phillips 000 screwdriver to remove the screw covering the proximity sensor.

  15. Samsung Galaxy S7 Active Motherboard Replacement: 手順 15、 2の画像 1 Samsung Galaxy S7 Active Motherboard Replacement: 手順 15、 2の画像 2
    • Use tweezers to remove the proximity sensor.

    • Set this aside for now.

  16. Samsung Galaxy S7 Active Motherboard Replacement: 手順 16、 1の画像 1
    • Use tweezers to disconnect the front mic and the two cables that have been marked in the photo.

  17. Samsung Galaxy S7 Active Motherboard Replacement: 手順 17、 1の画像 1
    • Use your hands and a metal spudger to lift the motherboard out of the phone.

    • Be gentle, as there is still a connection on the underside of the motherboard.

    • Use a metal spudger to remove this connection.

終わりに

To reassemble your device, follow these instructions in reverse order.

3 の人々がこのガイドを完成させました。

作成者

3人の作成者と共同で作成されました。

Joe De Leone

メンバー登録日: 04/18/18

310 ポイント

3のガイドは作成済み

チーム

Cal Poly, Team S18-G1, Livingston Spring 2018 Cal Poly, Team S18-G1, Livingston Spring 2018人のメンバー

CPSU-LIVINGSTON-S18S18G1

4 メンバー

15のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 21

今までの合計 5,165