メインコンテンツにスキップ

はじめに

Use this guide to replace a damaged or malfunctioning battery terminal in the Roku XD 2050X remote control. To complete this guide, you will need to disassemble your remote and use a soldering iron to replace the terminal.

パーツ

パーツは指定されていません。

  1. Take care when handling components.  Circuit boards, soldering points, and other areas may have sharp points. Remove the battery cover.
    • Take care when handling components. Circuit boards, soldering points, and other areas may have sharp points.

    • Remove the battery cover.

    • Remove the two AA batteries.

  2. Insert flat edge of spudger into seam between the top and bottom halves of the remote control. Gently twist the spudger to separate the top and bottom halves of the remote.
    • Insert flat edge of spudger into seam between the top and bottom halves of the remote control.

    • Gently twist the spudger to separate the top and bottom halves of the remote.

  3. Gently use the spudger to pry the circuit board loose.
    • Gently use the spudger to pry the circuit board loose.

  4. Using either end of the spudger, gently lift and remove the clear keypad backing.
    • Using either end of the spudger, gently lift and remove the clear keypad backing.

  5. Using either end of the spudger, lift and remove the rubber keypad.
    • Using either end of the spudger, lift and remove the rubber keypad.

  6. Desolder the contacts for the battery terminals.
    • Desolder the contacts for the battery terminals.

    • Remove the battery terminals from the circuit board.

    • For hep with soldering view the ifixit soldering guide.

まとめ

To reassemble your device, follow these instructions in reverse order.

William

メンバー登録日: 2015年01月30日

1,483 ポイント

10のガイドは作成済み

チーム

University of Kentucky Louisville, Team 1-6, Rountree Winter 2015 University of Kentucky Louisville, Team 1-6, Rountree Winter 2015人のメンバー

LOUISVILLE-ROUNTREE-W15S1G6

4 メンバー

10のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 1

過去 7 日: 2

過去 30 日: 5

今までの合計 629