メインコンテンツにスキップ

Ridgid GEN5X R8642 Switch Replacement

必要な工具と部品

  1. Ridgid GEN5X R8642 Switch Replacement, Switch: 手順 1、 1の画像 1
    • Remove the plastic tab holding the handle cover in place by prying upward with the spudger until the tab pops off.

  2. Ridgid GEN5X R8642 Switch Replacement: 手順 2、 1の画像 1
    • Remove the handle cover by pulling it towards the front of the saw.

    • The grip can sometimes become stuck and may require a decent amount of force to remove.

  3. Ridgid GEN5X R8642 Switch Replacement: 手順 3、 2の画像 1 Ridgid GEN5X R8642 Switch Replacement: 手順 3、 2の画像 2
    • Use a T20 Torx screwdriver to remove the nine M4 X 16mm screws from the plastic housing.

  4. Ridgid GEN5X R8642 Switch Replacement: 手順 4、 1の画像 1
    • Use a JIS #1 screwdriver to remove the two M4 x 25mm screws on both sides of the metal housing.

  5. Ridgid GEN5X R8642 Switch Replacement: 手順 5、 1の画像 1
    • Remove one half of the plastic housing using a spudger so that the internal system is exposed.

  6. Ridgid GEN5X R8642 Switch Replacement: 手順 6、 1の画像 1
    • Remove the plastic wire covers to the red and black connections on the switch assembly.

  7. Ridgid GEN5X R8642 Switch Replacement: 手順 7、 1の画像 1
    • Remove the soldered connection from the switch assembly.

  8. Ridgid GEN5X R8642 Switch Replacement: 手順 8、 1の画像 1
終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

3人の作成者と共同で作成されました。

Dylan Sutton

メンバー登録日: 03/26/19

279 ポイント

1ガイドが承認済み

チーム

Western Carolina University, Team S1-G3, Virtue Spring 2019 Western Carolina University, Team S1-G3, Virtue Spring 2019人のメンバー

WCU-VIRTUE-S19S1G3

4 メンバー

5のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 1

過去 7 日: 3

過去 30 日: 9

今までの合計 284