Skip to main content

ガイド紹介

In this guide, you will learn how to replace the speaker on your device.

  1. Use a philips #00 screwdriver to unscrew both 4.064mm screws at the top of the device which hold it together. Use a philips #00 screwdriver to unscrew both 4.064mm screws at the top of the device which hold it together.
    • Use a philips #00 screwdriver to unscrew both 4.064mm screws at the top of the device which hold it together.

  2. Press a plastic opening tool into the space between the front and back portions of the case. Run it along the perimeter of the device to unhook the many plastic tabs.
    • Press a plastic opening tool into the space between the front and back portions of the case.

    • Run it along the perimeter of the device to unhook the many plastic tabs.

    • Gently pull both sides apart.

    • The speaker is connected to the back cover so be careful when separating

  3. Android 修理キット

    交換用スクリーンやバッテリーの修理キット

    ショップを見る

    Android 修理キット

    交換用スクリーンやバッテリーの修理キット

    ショップを見る
  4. Use a Soldering iron to removed the soldered connections for the speaker
    • Use a Soldering iron to removed the soldered connections for the speaker

    • For your safety and to ensure a correct repair, be sure to exercise caution when using the soldering iron

    • For more information about soldering, check out this guide.

  5. Using a spudger, gently pry the speaker out of its plastic enclosure.
    • Using a spudger, gently pry the speaker out of its plastic enclosure.

終わりに

To reassemble your device, follow these instructions in reverse order.

Stephen Radachy

メンバー登録日: 2015年03月17日

807 Reputation

5のガイドは作成済み

チーム

Michigan Tech, Team 1-5, Lauer Spring 2015 Michigan Tech, Team 1-5, Lauer Spring 2015人のメンバー

MTU-LAUER-S15S1G5

2 メンバー

12のガイドは作成済み

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 3

All Time: 286