メインコンテンツにスキップ

はじめに

In this guide you will learn how to replace the motherboard on a RCA RCT6272W23

  1. Use a philips #00 screwdriver to unscrew both 4.064mm screws at the top of the device which hold it together. Use a philips #00 screwdriver to unscrew both 4.064mm screws at the top of the device which hold it together.
    • Use a philips #00 screwdriver to unscrew both 4.064mm screws at the top of the device which hold it together.

  2. Press a plastic opening tool into the space between the front and back portions of the case. Run it along the perimeter of the device to unhook the many plastic tabs.
    • Press a plastic opening tool into the space between the front and back portions of the case.

    • Run it along the perimeter of the device to unhook the many plastic tabs.

    • Gently pull both sides apart.

    • The speaker is connected to the back cover so be careful when separating

  3. Use a soldering iron to remove the soldered connections on the motherboard For your safety and to ensure a correct repair, be sure to exercise caution when using the soldering iron. For more information about soldering, check out this guide.
    • Use a soldering iron to remove the soldered connections on the motherboard

    • For your safety and to ensure a correct repair, be sure to exercise caution when using the soldering iron.

    • For more information about soldering, check out this guide.

  4. Use a philips #00 screwdriver to unscrew the three 4.064mm screws which attach the motherboard to the front of the device.
    • Use a philips #00 screwdriver to unscrew the three 4.064mm screws which attach the motherboard to the front of the device.

  5. Use your fingers to pop the three black tabs up to release the flat plastic data transfer cables. Use your fingers to pop the three black tabs up to release the flat plastic data transfer cables.
    • Use your fingers to pop the three black tabs up to release the flat plastic data transfer cables.

  6. Pull up the motherboard from the rest of the body.
    • Pull up the motherboard from the rest of the body.

終わりに

To reassemble your device, follow these instructions in reverse order.

3 の人々がこのガイドを完成させました。

Stephen Radachy

メンバー登録日: 2015年03月17日

807 ポイント

5のガイドは作成済み

チーム

Michigan Tech, Team 1-5, Lauer Spring 2015 Michigan Tech, Team 1-5, Lauer Spring 2015人のメンバー

MTU-LAUER-S15S1G5

2 メンバー

12のガイドは作成済み

コメント1件

i need to know everything there is about the motherboard. an tablet. images, info etc

Paul Shreves - 返信

コメントを追加

統計データを表示:

過去 24時間: 3

過去 7 日: 3

過去 30 日: 8

今までの合計 1,763