メインコンテンツにスキップ

Philips Norelco MultiGroom 3100 Motor Replacement

必要な工具と部品

  1. Philips Norelco MultiGroom 3100 Motor Replacement, Power Button: 手順 1、 1の画像 1
    • Remove the comb from the top of the trimmer.

  2. Philips Norelco MultiGroom 3100 Motor Replacement: 手順 2、 2の画像 1 Philips Norelco MultiGroom 3100 Motor Replacement: 手順 2、 2の画像 2
    • Grip the attachment and twist it counterclockwise until you hear a click.

    • Pull the attachment up to remove it from the trimmer.

  3. Philips Norelco MultiGroom 3100 Motor Replacement: 手順 3、 2の画像 1 Philips Norelco MultiGroom 3100 Motor Replacement: 手順 3、 2の画像 2
    • Hold the trimmer upright so it is facing you.

    • Insert the plastic opening tool in the gap at the top of the power button.

  4. Philips Norelco MultiGroom 3100 Motor Replacement: 手順 4、 1の画像 1
    • Apply pressure to pry off the power button.

  5. Philips Norelco MultiGroom 3100 Motor Replacement, Casing: 手順 5、 2の画像 1 Philips Norelco MultiGroom 3100 Motor Replacement, Casing: 手順 5、 2の画像 2
    • Insert the spudger into the bottom of the gray bezel and begin to gently pry it off.

    • Separate the bezel one clip at a time so that the clips do not break.

  6. Philips Norelco MultiGroom 3100 Motor Replacement: 手順 6、 2の画像 1 Philips Norelco MultiGroom 3100 Motor Replacement: 手順 6、 2の画像 2
    • Insert the spudger in the indicated hole and apply a tilting force to loosen the outer casing.

    • Pull upward on the top of the inner housing to remove it from the outer casing.

  7. Philips Norelco MultiGroom 3100 Motor Replacement, Motor: 手順 7、 2の画像 1 Philips Norelco MultiGroom 3100 Motor Replacement, Motor: 手順 7、 2の画像 2
    • Use the tweezers to pull out the inner power button.

  8. Philips Norelco MultiGroom 3100 Motor Replacement: 手順 8、 1の画像 1
    • Use the plastic opening tool to separate the clip on the right side of the inner housing.

  9. Philips Norelco MultiGroom 3100 Motor Replacement: 手順 9、 2の画像 1 Philips Norelco MultiGroom 3100 Motor Replacement: 手順 9、 2の画像 2
    • Push the inner housing up and to the right to separate the left clip from the battery casing.

    • Push the inner housing upwards to separate it from the battery casing.

  10. Philips Norelco MultiGroom 3100 Motor Replacement: 手順 10、 2の画像 1 Philips Norelco MultiGroom 3100 Motor Replacement: 手順 10、 2の画像 2
    • Use the tweezers to hold the wire steady as you unsolder the blue wire from the power switch.

    • Use the tweezers to remove the power switch.

    • For help with soldering check out the iFixit Soldering Technique Guide.

  11. Philips Norelco MultiGroom 3100 Motor Replacement: 手順 11、 3の画像 1 Philips Norelco MultiGroom 3100 Motor Replacement: 手順 11、 3の画像 2 Philips Norelco MultiGroom 3100 Motor Replacement: 手順 11、 3の画像 3
    • Pull up on the motor to remove it from the battery casing.

    • Use the tweezers to hold the black wire steady while unsoldering it from the base of the battery.

    • Using the tweezers, pull on the black wire to remove it from the base of the battery.

終わりに

To reassemble your device, follow these instructions in reverse order.

4 の人々がこのガイドを完成させました。

作成者

2人の作成者と共同で作成されました。

ahaharevolution

メンバー登録日: 10/04/15

759 ポイント

3のガイドは作成済み

チーム

USF Tampa, Team 1-1, Leahy Fall 2015 USF Tampa, Team 1-1, Leahy Fall 2015人のメンバー

USFT-LEAHY-F15S1G1

2 メンバー

3のガイドは作成済み

4 件のコメント

¿Me puedes ayudar con algo?

Johan Avendaño - 返信

Can you help me with something?

Johan Avendaño - 返信

this guide was created also by nina lovekrist in 2015

Nina Lovekrist - 返信

Where can I get the motor with copper shaft?

amal.hardik - 返信

コメントを追加

統計データ:

過去 24時間: 2

過去 7 日: 8

過去 30 日: 18

今までの合計 4,641