NuVision Duo 11 Battery Replacement

はじめに

Have you noticed that your computer's battery might not be as good as good as when you got the device?This replacement guide for the NuVision Duo 11 battery will help you replace that old battery with a new one. This guide will go over soldering, taking apart the battery from the motherboard, and replacement. When reassembling, remember to add a non-corrosive adhesive to the battery so it will stick. This is optional and can be of your choosing, but make sure you can remove it in the future

必要な工具と部品

手順1 Back Panel

NuVision Duo 11 Battery Replacement, Back Panel: 手順 1、 1の画像 1

Place the flat end of a nylon spudger in the gap between the cover and the rest of the device.
Slide the spudger down each side until you hear numerous clicks.
Remove the back panel from the tablet.

編集

手順2 Battery

NuVision Duo 11 Battery Replacement, Battery: 手順 2、 2の画像 1

NuVision Duo 11 Battery Replacement, Battery: 手順 2、 2の画像 2

Carefully remove any pieces of electrical tape that may be adhered to the battery.
The tape may be adhered to wires; be sure to pull up the tape slowly.

編集

手順3

Desolder the battery carefully from the motherboard.
For help with soldering, visit iFixit's How to Solder and Desolder Connections guide.

編集

手順4

Gently peel the battery from the front case.
You will be met with some resistance, so it is critical that you are very careful.
DO NOT puncture or bend the battery. It may explode or leak toxic chemicals.