はじめに

You will be able to use this guide to successfully replace a faulty speaker on your tablet. To do so, you will need to disassemble your tablet and use soldering tools.

Look towards the topside of the tablet, where the power button is located.
  • Look towards the topside of the tablet, where the power button is located.

  • Insert a plastic opening tool in the crack between the two parts of the case.

  • Move it gently back and forth to open the case.

コメントを追加する

With the plastic opening tool in the opening between the two sides of the case, slide the tool along the tablet's border to separate the two sides completely.
  • With the plastic opening tool in the opening between the two sides of the case, slide the tool along the tablet's border to separate the two sides completely.

  • Be careful when you separate the two halves. Open the case from the opposite side of the camera, there is a cable connecting both halves of the case.

コメントを追加する

  • Remove the tape holding the battery in place.

コメントを追加する

  • Insert the flat end of the spudger tool in the crack beneath the battery.

  • Move the spudger tool carefully side to side to remove the glue that is holding the battery in place.

  • This is a soft battery, so a little bending is expected.

コメントを追加する

  • After the battery is unglued, locate the cables that connect it to the motherboard.

  • Annotate where each color goes to make the reassembly easier.

コメントを追加する

  • Desolder the cables with a soldering iron and use a desoldering braid to remove the solder.

  • Review the Ifixit soldering guide if you need help soldering.

  • You can now remove the battery.

コメントを追加する

  • Remove the tape holding the speaker in its socket.

コメントを追加する

  • After you remove the tape, remove the speaker from its socket. You can place the speaker on one side of the tablet to have more freedom.

  • Look for the place where the speaker's cables meet with the motherboard.

  • Annotate where which color goes to make the reassembly easier.

コメントを追加する

  • Use a soldering iron to desolder the cables and extract the solder using a desoldering braid.

  • Review the Ifixit soldering guide if you need help soldering.

  • You can now remove the speaker.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

Daniel Gomero

メンバー登録日: 2015年01月21日

879 ポイント

5のガイドは作成済み

チーム

USF Tampa, Team 5-5, Brown Winter 2015 USF Tampa, Team 5-5, Brown Winter 2015人のメンバー

USFT-BROWN-W15S5G5

3 メンバー

5のガイドは作成済み

コメント1件

How can I restore the memory on these tablets - were having problems with this tablet please help us

annievvtait07 - 返信

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 1

今までの合計 123