Nikon D80 Flash Assembly Replacement

はじめに

After extended use, bulbs often burn out. Replace the flash assembly using this guide. For safety purposes, please remove the battery before working with any electronic components.

Please note that this guide requires soldering. For more information on how to solder and desolder connections, please visit this guide.

必要な工具と部品

手順1 Flash Assembly

Nikon D80 Flash Assembly Replacement, Flash Assembly: 手順 1、 3の画像 1

Nikon D80 Flash Assembly Replacement, Flash Assembly: 手順 1、 3の画像 2

Nikon D80 Flash Assembly Replacement, Flash Assembly: 手順 1、 3の画像 3

Press the highlighted button to pop the flash up.
Otherwise, use a plastic opening tool to gently lever open the flash by inserting the tool into the gap between the flash and the camera.

編集

手順2

Use the #00 Phillips-head screwdriver to remove both 4.20 mm screws by rotating the screwdriver to the left.

編集

手順3

Using a plastic opening tool, pry open the cover.
Be advised, some plastic struts may snap off when you remove the cover.

編集

手順4

Using a soldering iron, desolder the orange, tan, and gray wires from the flash assembly.
For more information on how to solder and desolder connections, please visit this guide.
Use caution while using the hot soldering iron.