はじめに

The LCD unit is the main component of the digital display on the D5100. This guide will teach you how to remove and replace it.

Using a screwdriver, remove the four screws around the perimeter of the LCD panel.
  • Using a screwdriver, remove the four screws around the perimeter of the LCD panel.

Possible "000" (smaller than "00") size screw driver. My 00 was too big.

Peter XYZ - 返信

Using a fingernail or the flat edge of a spudger inserted into the seam, separate the LCD bevel from the main panel body.
  • Using a fingernail or the flat edge of a spudger inserted into the seam, separate the LCD bevel from the main panel body.

コメントを追加する

  • Remove the ribbon cables on the LCD's circuitboard by flipping up their plastic clasps and removing it from their casing.

コメントを追加する

  • Disconnect the 16-pin cable by gently pulling it upward, away from the circuitboard, until it is removed from its port.

コメントを追加する

  • Desolder the 3 wires (red, yellow, and black) connecting the LCD board to the main camera body.

Solder Iron tool should had been at the very top. :D

Peter XYZ - 返信

  • The LCD assembly can now be fully separated from the main camera body.

  • Remove the plastic bezel and metal bracket from the LCD itself to complete the removal process.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

5 の人々がこのガイドを完成させました。

Liz

メンバー登録日: 2014年04月25日

1,053 ポイント

5のガイドは作成済み

チーム

Cal Poly, Team 10-54, Amido Spring 2014 Cal Poly, Team 10-54, Amido Spring 2014人のメンバー

CPSU-AMIDO-S14S10G54

4 メンバー

5のガイドは作成済み

Thank you so much! My camera was dropped . And yelow and black wires came off. Now i will try to fix it.

What is the functions of these wires?

Ilia - 返信

Thanks for this Liz.

Removing the broken LCD from my Nikon D5100 seems like something I can do now!

I am unsure ?how to do the soldering bit to attach the new LCD, ?where to attach the wires...

Any help is welcome

Felipe Castro - 返信

I was able to fix it, thanks to you guys. But the colors that came on the, LCD are weird. At least I can see the image.

Arline Osuna - 返信

I am having trouble reconnecting the 16-pin cable to the circuit board. Do you have any tips?

Lyle Ralston - 返信

コメントを追加する

統計データを表示:

過去 24時間: 2

過去 7 日: 16

過去 30 日: 92

今までの合計 6,915