メインコンテンツにスキップ

はじめに

Before proceeding with the replacement guide, please ensure the headphones are unplugged from any device.

パーツ

パーツは指定されていません。

  1. See the speaker replacement guide and follow steps 1 and 2. See the speaker replacement guide and follow steps 1 and 2.
    • See the speaker replacement guide and follow steps 1 and 2.

  2. Use the T6 torx screwdriver to remove the seven screws located around the headphone cover and place the screws in a safe place.
    • Use the T6 torx screwdriver to remove the seven screws located around the headphone cover and place the screws in a safe place.

    • To avoid stripping screws, be sure to use the right drill bit oriented perpendicular to the face of the screw.

  3. PCラップトップ用バッテリー

    iFixitの品質保証付きトップPCブランド用バッテリー

    ショップを見る

    PCラップトップ用バッテリー

    iFixitの品質保証付きトップPCブランド用バッテリー

    ショップを見る
  4. Carefully lift the speaker out of its housing while leaving all wires connected.
    • Carefully lift the speaker out of its housing while leaving all wires connected.

  5. Lift the module out of the headphone cup, leaving all wires attached.
    • Lift the module out of the headphone cup, leaving all wires attached.

    • Clip the two wires circled in orange.

    • Now that the speaker is free set it aside.

    • Clip the two wires circled in yellow.

    • Replace speaker module and solder it to the two wires circled in orange.

    • Now solder the speaker wires (circled in yellow) back to the module.

    • For soldering see the ifixit soldering guide: はんだ付けとはんだ除去の作業ガイド

まとめ

To reassemble your device, follow these instructions in reverse order.

Ben

メンバー登録日: 2014年02月24日

104 ポイント

1ガイドが承認済み

チーム

Michigan Tech, Team 5-1, Lauer Spring 2014 Michigan Tech, Team 5-1, Lauer Spring 2014人のメンバー

MTU-LAUER-S14S5G1

2 メンバー

3のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 1

今までの合計 143