メインコンテンツにスキップ

Motorola Moto G7 Play Screen Replacement

必要な工具と部品

  1. Motorola Moto G7 Play Screen Replacement, Front Display Screen: 手順 1、 2の画像 1 Motorola Moto G7 Play Screen Replacement, Front Display Screen: 手順 1、 2の画像 2
    • Use a heat gun, hairdryer, or iOpener to weaken the adhesive around the front screen. If you're using the iOpener, please review the instructions for proper use.

    • Use the plastic opening tools or picks to create an gap between the screen and the rest of the device.

    • Do not use the Jimmy or metal spudger on fragile components, as these tools may end up causing more damage than good.

  2. Motorola Moto G7 Play Screen Replacement: 手順 2、 1の画像 1
    • Use the suction cup tool to lift the screen without damaging or scratching screen.

  3. Motorola Moto G7 Play Screen Replacement: 手順 3、 2の画像 1 Motorola Moto G7 Play Screen Replacement: 手順 3、 2の画像 2
    • Disconnect the ribbon cable to fully detach the screen from the device.

    • Remove the display assembly from the device.

終わりに

To reassemble your device, follow these instructions in reverse order.

7 の人々がこのガイドを完成させました。

作成者

3人の作成者と共同で作成されました。

curt caudle

メンバー登録日: 02/15/21

349 ポイント

3のガイドは作成済み

2 件のコメント

This is not correct at all, all you did was rip the screen off.

To anyone else looking for help use the battery replacement guide for this model and you’ll have much better instructions

Ender - 返信

I agree with Ender, this is the farthest thing from instructions on how to replace the screen. It’s just photos of how someone pulled the display off the frame. I can’t think of a reason anyone would do this. What’s the point?

Can we take away 30 points?

Jeana Morales - 返信

コメントを追加

統計データ:

過去 24時間: 5

過去 7 日: 11

過去 30 日: 73

今までの合計 4,138