はじめに
This video demonstrates how to replace the kickstand, SSD, Display, Surflink port assembly, thermal module (or heatsink), battery, volume and power buttons, speakers, Wi‑Fi deck, cameras, motherboard, and chassis in your Microsoft Surface 9 tablet.
Please refer to the official Microsoft Service Guide for step-by-step instructions.
Chapters
00:00 Introduction and Prerequisite Steps
Disassembly
01:26 Kickstand
02:24 rSSD
02:42 Display
05:36 Surflink
06:06 Thermal Module
07:04 Battery
07:35 Volume and Power Buttons
08:03 Speakers
08:17 Wi-Fi Deck
08:36 Front and Rear Cameras
09:01 Motherboard
09:31 Chassis
Reassembly
09:47 Chassis
09:58 Motherboard
10:22 Front and Rear Cameras
10:46 Wi-Fi Deck
11:05 Speakers
11:20 Volume and Power Buttons
11:42 Battery
12:39 Thermal Module
13:02 Surflink
13:18 Display
15:48 rSSD
16:02 Kickstand
必要な工具と部品
ビデオインストラクション
After your repair, test your Surface Pro with Microsoft's Surface Diagnostic Toolkit.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.
After your repair, test your Surface Pro with Microsoft's Surface Diagnostic Toolkit.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.
コメント 1 件
where do we get the display adhesive and the speaker mesh?
@cashewclay
Mohamed B - 返信