はじめに
Upgrade your hard drive for more storage space! This guide will also show you how to replace the hard drive bracket.
必要な工具と部品
-
-
Remove the following ten screws securing the lower case to the upper case:
-
Three 13.5 mm (14.1 mm) Phillips screws.
-
Seven 3 mm Phillips screws.
-
-
-
Use the edge of a spudger to pry the battery connector upwards from its socket on the logic board.
-
-
-
-
Remove two T6 Torx screws from each side of the hard drive (four screws total).
-
If desired, peel the pull tab off your old hard drive and transfer it to the side of your new drive.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
233 の人々がこのガイドを完成させました。
31 件のコメント
This made me feel like techie instead of a newbie!
I have the MacBook Pro mid-2012 15" and I have installed Samsung SSD 840 EVO 2.5" form factor drive and it fits fine. Really makes the MacBook fast.