メインコンテンツにスキップ

パーツ

パーツは指定されていません。

  1. If your I/O Board cable's connectors have notches in the padding, you will need to release a locking lever underneath the notch in order to remove the cable. If this is the case, don't pry up on the connector until the levers are unlatched. Using the flat end of a spudger, pry the I/O Board connector straight up out of its socket on the logic board. During reassembly, connect this end first as it does not flex.
    • If your I/O Board cable's connectors have notches in the padding, you will need to release a locking lever underneath the notch in order to remove the cable. If this is the case, don't pry up on the connector until the levers are unlatched.

    • Using the flat end of a spudger, pry the I/O Board connector straight up out of its socket on the logic board.

    • During reassembly, connect this end first as it does not flex.

    • In a similar fashion, remove the I/O Board connector from its socket on the I/O Board.

    • Remove the I/O Board cable from the MacBook Pro.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Brett Hartt

メンバー登録日: 2010年04月12日

121,837 ポイント

143のガイドは作成済み

チーム

iFixit iFixit人のメンバー

Community

138 メンバー

16,475のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 200