はじめに
Upgrade or replace the SuperDrive (requires a slim drive).
必要な工具と部品
-
-
Use your fingers to push both battery release tabs away from the battery, and lift the battery out of the computer.
-
-
-
-
Disconnect the orange SuperDrive ribbon cable from the logic board, removing tape as necessary.
-
-
-
Remove the two silver Phillips screws securing the mounting bracket to the left side of the optical drive.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
81 の人々がこのガイドを完成させました。