はじめに

This guide will lead you in desoldering the connections between the camera and the motherboard.

  1. Remove the two 8mm Phillips#0 screws on the back cover.
    • Remove the two 8mm Phillips#0 screws on the back cover.

    • The motherboard is attaching the two covers together, so don't separate them entirely just yet.

    • There is a button that loosens as the Phillips screws are removed. Don't be alarmed if it falls out.

    コメントを追加する

  2. Remove the four 6mm Phillips#0 screws  connecting the motherboard and front cover.
    • Remove the four 6mm Phillips#0 screws connecting the motherboard and front cover.

    • DO NOT detach the wire connecting the motherboard to the front cover.

    コメントを追加する

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Remove the two 8mm Phillips#0 screws on the back of the motherboard.

    コメントを追加する

    • Remove the camera from the motherboard by desoldering the two connections as shown.

    • Follow this link to learn how to properly solder and desolder your parts.

    コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

nieko

メンバー登録日: 2013年04月18日

63 ポイント

2のガイドは作成済み

チーム

Cal Poly, Team 12-34, Amido Spring 2013 Cal Poly, Team 12-34, Amido Spring 2013人のメンバー

CPSU-AMIDO-S13S12G34

4 メンバー

8のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 13

今までの合計 1,635