Lenovo Yoga 720-13IKB Fan Replacement

はじめに

It is important that your Lenovo Yoga 720-13IKB’s fan is running efficiently because it is essential to the cooling system that maintains proper laptop functionality. Over time, a laptop’s fan can accumulate dust or experience wear which typically results in the fan lasting for around three years on the lower estimates. Some symptoms that might warrant a fan replacement include abnormally loud fan noises, performance problems, overheating, and abrupt changes in fan speeds. This guide will provide steps to replacing your fan, which will aid in maintaining your laptop’s performance.

必要な工具と部品

手順1 Bottom Cover

Lenovo Yoga 720-13IKB Fan Replacement, Bottom Cover: 手順 1、 3の画像 1

Lenovo Yoga 720-13IKB Fan Replacement, Bottom Cover: 手順 1、 3の画像 2

Lenovo Yoga 720-13IKB Fan Replacement, Bottom Cover: 手順 1、 3の画像 3

この手順で使用する道具：

T5 Torx Screwdriver

$5.49

購入する

Before you begin, be sure to turn off your laptop and discharge the battery down to 25%.
Start by flipping the device over so that you see the screws.
Remove seven Torx T5 short screws.
Remove three Torx T5 long screws.

編集

手順2

Lenovo Yoga 720-13IKB Fan Replacement: 手順 2、 3の画像 3

この手順で使用する道具：

iFixit Opening Tool

$1.99

購入する

Starting from the USB port, use your opening tool to gently pry up the case.
Make sure you are prying on the cover itself, not the metal shield around the USB port.
Pry along the laptop in the order shown by the arrows.
Do NOT pry along the top side, or you risk damaging the casing. Stay with the arrows.

編集

手順3

Lenovo Yoga 720-13IKB Fan Replacement: 手順 3、 3の画像 3

Lift the case from the bottom side. NOT the side with the hinges.
When you feel resistance, do NOT keep lifting or you will damage the housing.
Once you feel resistance, gently pull the case towards you. (away from the hinges.)
Remove the case.

編集

手順4 Fan

Lenovo Yoga 720-13IKB Fan Replacement, Fan: 手順 4、 2の画像 1

Lenovo Yoga 720-13IKB Fan Replacement, Fan: 手順 4、 2の画像 2

Use a JIS #000 screwdriver to unscrew and remove the seven 2.5mm screws that secure the fan to the motherboard.
Remove the fan from the laptop.
Follow the instructions found here to reapply new thermal paste. If your replacement heat sink and fan assembly has thermal paste pre-applied, you'll simply need to remove the old thermal paste from the laptop.