メインコンテンツにスキップ

はじめに

If your battery is not functioning properly, this guide will highlight the steps on how to replace it.

パーツ

パーツは指定されていません。

  1. Ensure the device is off and unplugged.
    • Ensure the device is off and unplugged.

    • Remove the stylus from its port and set aside.

  2. Using a Phillips #1  screwdriver, gently unscrew the eight 1.3 mm Phillips #1 screws until you hear an audible click. The screws will not separate from the bottom cover when loose.
    • Using a Phillips #1 screwdriver, gently unscrew the eight 1.3 mm Phillips #1 screws until you hear an audible click.

    • The screws will not separate from the bottom cover when loose.

  3. The bottom cover is attached via several plastic clips located around the edges of the bottom cover. Using a plastic opening tool, gently pry the bottom cover from the laptop.
    • The bottom cover is attached via several plastic clips located around the edges of the bottom cover.

    • Using a plastic opening tool, gently pry the bottom cover from the laptop.

    • Work the plastic opening tool around the edges of the bottom cover undoing all of the plastic clips, as shown in the picture.

  4. Place your fingers around the edges of the cover and remove it. Place your fingers around the edges of the cover and remove it.
    • Place your fingers around the edges of the cover and remove it.

  5. Fold back the plastic cover to access the battery connection. Remove the battery connection using your two index fingers. Gently separate the connectors.
    • Fold back the plastic cover to access the battery connection.

    • Remove the battery connection using your two index fingers.

    • Gently separate the connectors.

  6. Unscrew the two 1.3 mm Phillips #1 fasteners using a Phillips #1 screwdriver and set them aside. Lift the battery free from its mounting and remove it. Lift the battery free from its mounting and remove it.
    • Unscrew the two 1.3 mm Phillips #1 fasteners using a Phillips #1 screwdriver and set them aside.

    • Lift the battery free from its mounting and remove it.

終わりに

To reassemble your device, follow these instructions in reverse order.

6 の人々がこのガイドを完成させました。

Daniel Fernandez

メンバー登録日: 2018年02月14日

909 ポイント

5のガイドは作成済み

チーム

USF Tampa, Team S2-G3, Eyestone Spring 2018 USF Tampa, Team S2-G3, Eyestone Spring 2018人のメンバー

USFT-EYESTONE-S18S2G3

4 メンバー

5のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 4

過去 7 日: 17

過去 30 日: 58

今までの合計 5,217