はじめに

If the laptop is loud, sounds irregular, and the bottom is hot, use this guide to replace your cooling fan.

  1. Turn off your laptop before you begin.
    • Turn off your laptop before you begin.

  2. Remove the nine 6mm screws circled in the picture using a T5 Torx Screwdriver. Remove the two 10mm screws circled in the picture using the same T5 Torx Screwdriver.
    • Remove the nine 6mm screws circled in the picture using a T5 Torx Screwdriver.

    • Remove the two 10mm screws circled in the picture using the same T5 Torx Screwdriver.

  3. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    当社のショップを閲覧する
  4. After all of the screws are removed, use the iFixit opening tools to carefully snap the black cover off. After all of the screws are removed, use the iFixit opening tools to carefully snap the black cover off.
    • After all of the screws are removed, use the iFixit opening tools to carefully snap the black cover off.

  5. Remove the three 5mm screws using the T5 Torx Screwdriver. Remove the three 5mm screws using the T5 Torx Screwdriver.
    • Remove the three 5mm screws using the T5 Torx Screwdriver.

  6. Pull black wire and gray wire away from cooling fan clips using the tweezers. Pull black wire and gray wire away from cooling fan clips using the tweezers.
    • Pull black wire and gray wire away from cooling fan clips using the tweezers.

  7. Pull out the cooling fan from where it is attached and pull it up until you see where the wire is attached to the motherboard. Using the iFixit Opening Tools, detach the connector. Pull out the cooling fan from where it is attached and pull it up until you see where the wire is attached to the motherboard. Using the iFixit Opening Tools, detach the connector. Pull out the cooling fan from where it is attached and pull it up until you see where the wire is attached to the motherboard. Using the iFixit Opening Tools, detach the connector.
    • Pull out the cooling fan from where it is attached and pull it up until you see where the wire is attached to the motherboard. Using the iFixit Opening Tools, detach the connector.

まとめ

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Isaiah Vang

メンバー登録日: 2018年10月04日

630 ポイント

6のガイドは作成済み

チーム

UW Stout, Team S6-G6, Ogden Fall 2018 UW Stout, Team S6-G6, Ogden Fall 2018人のメンバー

UWSTOUT-OGDEN-F18S6G6

4 メンバー

6のガイドは作成済み

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 5

今までの合計 85