はじめに

This guide will show you how to replace your broken screen.

  1. Make sure to open the back cover easily using the plastic opening tool
    • Make sure to open the back cover easily using the plastic opening tool

  2. Remove back cover by prying away from the Kurio. The easiest place to remove the cover is from the bottom and top; try to open it from right to left sides. The easiest place to remove the cover is from the bottom and top; try to open it from right to left sides.
    • Remove back cover by prying away from the Kurio.

    • The easiest place to remove the cover is from the bottom and top; try to open it from right to left sides.

  3. To remove the battery, make sure the four 5mm Philips screws on each side of your device is open using the Philips#1 Screwdriver. To remove the battery, make sure the four 5mm Philips screws on each side of your device is open using the Philips#1 Screwdriver.
    • To remove the battery, make sure the four 5mm Philips screws on each side of your device is open using the Philips#1 Screwdriver.

  4. After you remove your four 5mm Phillips screws, use your plastic opening tool to help you open the plastic cover of your device.
    • After you remove your four 5mm Phillips screws, use your plastic opening tool to help you open the plastic cover of your device.

    • All these screws are identical so don't worry if you get them out of order.

  5. Remove the plastic cover that is covering the camera area.
    • Remove the plastic cover that is covering the camera area.

  6. Free shipping on all orders over $100.00 or containing a Pro Tech Toolkit!

    当社のショップを閲覧する
  7. Separate the two halves of your Kurio Touch 4S and lay them besides each other.
    • Separate the two halves of your Kurio Touch 4S and lay them besides each other.

  8. Use Phillips # 1 screw to open the 4 screws on the motherboard.
    • Use Phillips # 1 screw to open the 4 screws on the motherboard.

    • Open the screws gently and do not apply too much force as you could damage the motherboard.

  9. Use the plastic opener to remove the battery.
    • Use the plastic opener to remove the battery.

  10. Use tweezers to remove the black tape that is attached to the motherboard.
    • Use tweezers to remove the black tape that is attached to the motherboard.

  11. Detach all the wire that are connected to the motherboard. Also remove the camera module and other components that are attached to the motherboard.
    • Detach all the wire that are connected to the motherboard.

    • Also remove the camera module and other components that are attached to the motherboard.

    • For more information on soldering Click here

  12. Remove the motherboard with the help of plastic opener.
    • Remove the motherboard with the help of plastic opener.

    • Detach the power plug before you remove the motherboard.

  13. Use the Plastic opener to remove the screen.
    • Use the Plastic opener to remove the screen.

    • Do not apply too much pressure as the front cover could be damaged.

  14. Use the soldering tool to remove the wire that is attached to the screen & the motherboard.
    • Use the soldering tool to remove the wire that is attached to the screen & the motherboard.

  15. Use tweezers to remove the screen from your Kurio Toich 4S.
    • Use tweezers to remove the screen from your Kurio Toich 4S.

まとめ

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

Ali

メンバー登録日: 2015年01月21日

163 ポイント

1ガイドが承認済み

チーム

USF Tampa, Team 6-5, Brown Winter 2015 USF Tampa, Team 6-5, Brown Winter 2015人のメンバー

USFT-BROWN-W15S6G5

3 メンバー

5のガイドは作成済み

統計データを表示:

過去 24時間: 2

過去 7 日: 3

過去 30 日: 10

今までの合計 1,176