はじめに
The motherboard is the most important part of the Jabra CRUISER2. It controls the device. This guide will tell you step-by-step how to remove the motherboard so you can replace it with a functioning one.
必要な工具と部品
-
-
Use the iOpener tool to unglue the adhesive of the device. The link to the iOpener instructions are listed below.
-
-
-
-
Carefully detach the wire running from the speaker to the motherboard by unplugging it from the white socket.
-
もう少しです!
To reassemble your device, follow these instructions in reverse order.
終わりに
To reassemble your device, follow these instructions in reverse order.