はじめに

This guide walks you through replacing the main speaker driver in a JBL Go 3. This may be necessary if your speaker is producing distorted sound, no audio, or rattling noises. Be prepared to handle delicate internal components and possibly perform some soldering.

必要な工具と部品

手順1 Driver

JBL Go 3 Driver Replacement, Driver: 手順 1、 2の画像 1

JBL Go 3 Driver Replacement, Driver: 手順 1、 2の画像 2

Hold the power button until the JBL Go 3 shuts off
Disconnect any charging cables
Use jimmy to remove the hard shell
Work your way around the edges slowly—be patient as it's glued or snapped in tightly

編集

手順2

JBL Go 3 Driver Replacement: 手順 2、 3の画像 3

Once the hard shell is removed,use jimmy to lift up the speaker part.
Locate the internal screws underneath the outer shell.
Use your precision screwdriver to remove all screws securing the plastic enclosure.
Carefully lift the casing to expose the speaker and other internal components.

編集

手順3

If accessible, unplug the battery to prevent any electrical short while working.
If it's soldered, proceed carefully and avoid touching metal contacts unnecessarily.
Unscrew any fasteners holding the speaker in place.

編集

終わりに

To reassemble your device, follow the above steps in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting or ask our Answers community for help.