Insignia NS-15MS0832B Battery Replacement

はじめに

In this guide you will see step by step how to replace the battery in your Insignia Wi-Fi Windows Tablet. You will need three tools a plastic spudger, tweezers, and a soldering iron to complete the replacement of the faulty battery.

必要な工具と部品

手順1 Battery

Insignia NS-15MS0832B Battery Replacement, Battery: 手順 1、 1の画像 1

Begin the replacement for the battery by opening up the device with a plastic opening tool along the edge.
Work the plastic opening tool along the edge until you have separated the screen from the back plate.

翻訳

手順2

Your tablet should look like this once separated.

翻訳

手順3

Start by placing tablet face down and carefully removing the mesh wire tap from the back of the battery.

翻訳

手順4

この手順で使用する道具：

Tweezers

$4.99

購入する

Remove the flat wire from its connector with the tweezers and fold to the side so that it's clear of the battery.

翻訳

手順5

Next locate where the battery has three wires attached to the mother board. Take out the soldering iron and begin heating it up.
Check out iFixit's How to Solder and Desolder Connections guide for soldering help.

翻訳

手順6

Once the soldering iron has heated up, begin by placing the tip of the iron where the wire directly meets the mother board. The soldering should heat up and allow you to gently pull the wire off. Repeat twice more to remove each of the three wires.

翻訳

手順7

Once all wires have been removed from mother board, take plastic opening tool and separate the battery from the back of the screen. Its connected with glue, so don't worry.

翻訳