Insignia Flex 8 Battery Replacement - iFixit 修理ガイド

はじめに

Welcome to the Insignia Flex 8 repair guide. If your battery is not holding a charge, use this guide to fix it. This replacement is simple and only requires a prying tool and soldering gun.

必要な工具と部品

手順1 Battery

Insignia Flex 8 Battery Replacement, Battery: 手順 1、 1の画像 1

Make sure the power is off to avoid injury in the following steps.
Position the tablet so that the screen is face down.
The power button is located in the upper left hand corner.
Hold the power button for three seconds until the tablet powers down.

手順2

Insignia Flex 8 Battery Replacement: 手順 2、 2の画像 1

Insignia Flex 8 Battery Replacement: 手順 2、 2の画像 2

Remove the back casing by sliding a credit card or a similarly thin but firm object in between the casing and the screen.
Run this object around the perimeter of the tablet until there is separation between the casing and the screen.
Remove the back casing and set aside.

手順3

Insignia Flex 8 Battery Replacement: 手順 3、 1の画像 1

Peel back the tape from battery and case.

手順4

Insignia Flex 8 Battery Replacement: 手順 4、 1の画像 1

Slide the spudger beneath battery to pry away it away from the case. Work around the battery, prying up all edges to remove from glue.
Do not puncture or bend battery. This could cause battery to leak acid.

手順5

Insignia Flex 8 Battery Replacement: 手順 5、 1の画像 1

Desolder the black, yellow and red connections from circuit board. Desoldering Help
Keep the soldering tool away from other components on the circuit board.

終わりに

To reassemble your device, follow these instructions in reverse order.

4 の人々がこのガイドを完成させました。

作成者

2人の作成者と共同で作成されました。

Tyler Tyrrell

メンバー登録日: 03/11/15

890 ポイント

4のガイドは作成済み

+14 個以上のバッジ

チーム

Colorado Springs, Team 5-5, Panko Spring 2015 Colorado Springs, Team 5-5, Panko Spring 2015人のメンバー

UCCS-PANKO-S15S5G5

3 メンバー

12のガイドは作成済み

0 件のコメント

統計データ:

過去 24時間: 0

過去 7 日: 3

過去 30 日: 6

今までの合計 9,095