メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

はじめに

Oh no! Your keyboard is no longer producing a clear sound! Never fear, this guide is here! If your Yamaha PSS 130 is creating a crackly sound or even no sound at all, it may be time to change the speaker.

The speaker uses a magnet to change electrical signals into sound that we can hear. If the speaker fails, the device will no longer produce quality sound.

Before starting this guide, make sure that the problem is not your power source.

If you use batteries, make sure the batteries are charged and seated correctly. If that does not work, try the power cord provided with the device.

If you use the power cord, try using batteries.

If one of those work, Congratulations! You fixed your device! If not, the speaker will need to be replaced.

This 9 step guide will require you to remove the solder from the speaker, replace the speaker and then solder the new speaker.

If you do not already know how to solder this soldering guide will help to teach you how to do it.

Before beginning this guide, take the batteries out and unplug the keyboard from the wall.

  1. Remove the battery cover. Remove all twelve of the 9.0 mm screws on the back cover of the device's casing using a Phillips #1 screwdriver.
    • Remove the battery cover.

    • Remove all twelve of the 9.0 mm screws on the back cover of the device's casing using a Phillips #1 screwdriver.

  2. Place your fingers in the battery compartment, and place your thumb on the back of the keyboard. Grip inside battery cover and push on the back of the keyboard with your thumb. Grip inside battery cover and push on the back of the keyboard with your thumb.
    • Place your fingers in the battery compartment, and place your thumb on the back of the keyboard.

    • Grip inside battery cover and push on the back of the keyboard with your thumb.

  3. Replace two 9.0 mm Phillips screws to keep the keys from falling out while working on this device. Replace two 9.0 mm Phillips screws to keep the keys from falling out while working on this device.
    • Replace two 9.0 mm Phillips screws to keep the keys from falling out while working on this device.

  4. Nintendo Switch 修理キット

    ゲームを再開するための、早くて簡単な修理キット

    Switch 修理キットページへ

    Nintendo Switch 修理キット

    ゲームを再開するための、早くて簡単な修理キット

    Switch 修理キットページへ
  5. Rotate the keyboard to get a better angle with the soldering iron. Rotate the keyboard to get a better angle with the soldering iron. Rotate the keyboard to get a better angle with the soldering iron.
    • Rotate the keyboard to get a better angle with the soldering iron.

  6. Desolder the connections of the old speaker using the soldering iron and the solder wick.
    • Desolder the connections of the old speaker using the soldering iron and the solder wick.

  7. Remove the fasteners using an 11 mm socket wrench. It will take very little torque to strip the plastic, so make sure that your wrench is turning them to the left. It will take very little torque to strip the plastic, so make sure that your wrench is turning them to the left.
    • Remove the fasteners using an 11 mm socket wrench.

    • It will take very little torque to strip the plastic, so make sure that your wrench is turning them to the left.

  8. The speaker should now be free. Simply lift the speaker out. Using the same process, place the new speaker in the speaker indentation.
    • The speaker should now be free. Simply lift the speaker out.

    • Using the same process, place the new speaker in the speaker indentation.

    • My own speaker was not malfunctioning so I did not replace it.

  9. Replace the fasteners that were removed in step 6, this time tightening to the right.
    • Replace the fasteners that were removed in step 6, this time tightening to the right.

  10. Solder the new speaker to the wires taken off in step 5.
    • Solder the new speaker to the wires taken off in step 5.

終わりに

To reassemble your device, follow these instructions in reverse order from step 3.

2 の人々がこのガイドを完成させました。

Mikey

メンバー登録日: 2020年03月23日

229 ポイント

1ガイドが承認済み

チーム

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 1

過去 7 日: 4

過去 30 日: 17

今までの合計 47