メインコンテンツにスキップ

How to Hem Pants by Hand-Sewing

必要な工具と部品

  1. How to Hem Pants by Hand-Sewing, How to Hem Pants by Hand-Sewing: 手順 1、 1の画像 1
    • Wear the pants and fold the hem up until you get your desired length.

  2. How to Hem Pants by Hand-Sewing: 手順 2、 1の画像 1
    • Remove the pants, making sure that the folded hem remains fixed.

    • Lay the pants down on a table and measure the length from the original hem to the folded edge.

    • Make sure to take note of all of your measurements.

  3. How to Hem Pants by Hand-Sewing: 手順 3、 1の画像 1
    • Turn the pants inside out, and unfold the folded edge.

    • Starting from the original hem, measure out the length of what will be your new hem.

    • The length you will need for this step would be the length you measured out from the previous step.

    • Using your fabric marker, draw a line marking where your new hem would be.

  4. How to Hem Pants by Hand-Sewing: 手順 4、 1の画像 1
    • Starting from the line you just created, measure out 1 inch and mark with a line.

  5. How to Hem Pants by Hand-Sewing: 手順 5、 1の画像 1
    • Using the 1 inch line as your guide, cut off the extra fabric.

  6. How to Hem Pants by Hand-Sewing: 手順 6、 2の画像 1 How to Hem Pants by Hand-Sewing: 手順 6、 2の画像 2
    • Fold the raw edge up to the new hem line.

    • Fold it again along the new hem line, so that the raw edge is now inside the fold.

  7. How to Hem Pants by Hand-Sewing: 手順 7、 2の画像 1 How to Hem Pants by Hand-Sewing: 手順 7、 2の画像 2
    • Place a sewing pin parallel to the fold to make sure that the fold stays in place.

    • Fold and pin all the way around to create your new hem.

  8. How to Hem Pants by Hand-Sewing: 手順 8、 1の画像 1
    • Have your needle threaded and ready to go.

    • Sew the fold close to create a new hem; try to keep your stitches small and even.

    • White thread was used instead of black to make the stitches more evident in the pictures.

  9. How to Hem Pants by Hand-Sewing: 手順 9、 3の画像 1 How to Hem Pants by Hand-Sewing: 手順 9、 3の画像 2 How to Hem Pants by Hand-Sewing: 手順 9、 3の画像 3
    • Once you're done stitching, tie off the thread by creating a knot towards the end of the string.

    • Cut off the excess string above the knot.

    • Remove all of the sewing pins.

    • Repeat steps 3 to 8 for the other pant leg using the same measurements, and then you're officially done!

終わりに

To reassemble your device, follow these instructions in reverse order.

18 の人々がこのガイドを完成させました。

作成者

2人の作成者と共同で作成されました。

Irish Pellas

メンバー登録日: 09/29/15

709 ポイント

1ガイドが承認済み

チーム

Cal Poly, Team 15-5, Green Fall 2015 Cal Poly, Team 15-5, Green Fall 2015人のメンバー

CPSU-GREEN-F15S15G5

4 メンバー

14のガイドは作成済み

コメント 1 件

Thank you for this guide! The only thing I am uncertain about is how determine a good length for the pants. I read in another guide that it would be good to measure with shoes on. So that the pant leg grazes the shoe. Can you recommend the same?

Christin Kalina - 返信

コメントを追加

統計データ:

過去 24時間: 37

過去 7 日: 255

過去 30 日: 980

今までの合計 141,047