メインコンテンツにスキップ

Hisense Sero 8 Motherboard Replacement

必要な工具と部品

  1. Hisense Sero 8 Motherboard Replacement, Motherboard: 手順 1、 3の画像 1 Hisense Sero 8 Motherboard Replacement, Motherboard: 手順 1、 3の画像 2 Hisense Sero 8 Motherboard Replacement, Motherboard: 手順 1、 3の画像 3
    • Remove the back cover of the device using the plastic opening tool.

    • Pry open a corner of the device, then continue down the side with the tool to open the device.

  2. Hisense Sero 8 Motherboard Replacement: 手順 2、 2の画像 1 Hisense Sero 8 Motherboard Replacement: 手順 2、 2の画像 2
    • Remove the black tape located to the left of the device.

    • Remove the clear tape directly below the camera.

  3. Hisense Sero 8 Motherboard Replacement: 手順 3、 1の画像 1
    • Remove the seven 4.43mm screws located at the top of the device using the Phillips #00 screwdriver.

    • There is no need to remove the bottom two screws holding the speakers in place.

  4. Hisense Sero 8 Motherboard Replacement: 手順 4、 1の画像 1
    • Unlock the three ribbon cable connector latches to remove the cables.

  5. Hisense Sero 8 Motherboard Replacement: 手順 5、 3の画像 1 Hisense Sero 8 Motherboard Replacement: 手順 5、 3の画像 2 Hisense Sero 8 Motherboard Replacement: 手順 5、 3の画像 3
    • Be cautious of the extremely hot tip of the soldering iron.

    • Desolder the red, black, and yellow wires to remove the motherboard. Take a look at this guide to learn how to solder and desolder connections.

    • Desolder the black wire located on the top left of the device.

    • Once desoldered, carefully lift the motherboard out of the device.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

6人の作成者と共同で作成されました。

Katharina

メンバー登録日: 02/23/15

506 ポイント

2のガイドは作成済み

チーム

USF Tampa, Team 1-2, Leahy Winter 2015 USF Tampa, Team 1-2, Leahy Winter 2015人のメンバー

USFT-LEAHY-W15S1G2

3 メンバー

10のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 1

今までの合計 1,326