Heyday Suitcase Turntable Volume Knob Replacement

はじめに

If you need to replace the volume knob of your Heyday Suitcase Turntable, follow this repair guide. If the volume knob has no affect on sound level, it likely needs to be replaced.

Before beginning your repair, be sure to turn off the record player and unplug the power cord.

This guide requires soldering so if you aren't familiar or need a refresher, take a look at the guide for How to Solder and Desolder Connections. Be careful when soldering as the iron is very hot and will burn skin and other items.

必要な工具と部品

手順1 Baseboard

Heyday Suitcase Turntable Volume Knob Replacement, Baseboard: 手順 1、 1の画像 1

Use a Phillips #2 screwdriver to remove the four screws on each corner of the baseboard.

編集

手順2

Use a metal spudger to pry the baseboard off of the case.
Be cautious of the cords and circuit located underneath the knob and the lever. Don't pull or yank the baseboard off.

編集

手順3

Disconnect the cords from the circuit board.
Take a picture beforehand so it's easier to put them back during reassembly.
Remove the baseboard.

編集

手順4 Volume Knob

Heyday Suitcase Turntable Volume Knob Replacement, Volume Knob: 手順 4、 1の画像 1

Use a metal spudger to pry the volume knob off of the baseboard.

編集

手順5

Use your fingers to unscrew the nut securing the volume knob.

編集

手順6

Use a metal spudger to pry the power knob off of the baseboard.

編集

手順7

Use your fingers to unscrew the nut securing the power knob.

編集

手順8

Pull the circuit board down from the baseboard to separate them.

編集

手順9

To release the volume knob, desolder each of the eight solder joints.
Make sure to take proper safety precautions while operating soldering iron. For a review, take a look at the guide on How to Solder and Desolder Connections.