HTC Vive Facerest Replacement

はじめに

Use this guide to remove and replace the facerest on an HTC Vive.

必要な工具と部品

手順1 Unscrew the head strap mounts

HTC Vive Facerest Replacement, Unscrew the head strap mounts: 手順 1、 2の画像 1

HTC Vive Facerest Replacement, Unscrew the head strap mounts: 手順 1、 2の画像 2

Be sure to power down and disconnect your Vive before beginning.
Use a T5 Torx driver to remove the two 12 mm-long screws securing the head strap mounts on either side of the headset.
For some devices, a T6 Torx driver may work better.
The mounts may fall off when the screws are removed, so be careful not to lose any parts.

編集

手順2 Remove the head strap mounts

HTC Vive Facerest Replacement, Remove the head strap mounts: 手順 2、 3の画像 1

HTC Vive Facerest Replacement, Remove the head strap mounts: 手順 2、 3の画像 2

HTC Vive Facerest Replacement, Remove the head strap mounts: 手順 2、 3の画像 3

Remove both head strap mounts.

編集

手順3 Remove the facerest

HTC Vive Facerest Replacement, Remove the facerest: 手順 3、 2の画像 1

HTC Vive Facerest Replacement, Remove the facerest: 手順 3、 2の画像 2

Slide the facerest straight away from the headset to remove it.

編集

終わりに

Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.

To reassemble your device, follow the above steps in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Check out our Answers community for troubleshooting help.

4 の人々がこのガイドを完成させました。