メインコンテンツにスキップ

HP Pavilion 13-P110NR Screen Replacement

必要な工具と部品

  1. HP Pavilion 13-P110NR Screen Replacement, Screen: 手順 1、 1の画像 1
    • Remove the back of the laptop screen using a black nylon spudger.

  2. HP Pavilion 13-P110NR Screen Replacement: 手順 2、 1の画像 1
    • Detach the wires from the green circuit boards located at the bottom.

    • Remove three 3.0 mm #00 Philips screws from the circuit board on the left.

    • Remove two 4.0 mm #00 Philips screws from the small circuit board on the right.

  3. HP Pavilion 13-P110NR Screen Replacement: 手順 3、 1の画像 1
    • Detach the wires located just above the bigger green circuit board.

  4. HP Pavilion 13-P110NR Screen Replacement: 手順 4、 2の画像 1 HP Pavilion 13-P110NR Screen Replacement: 手順 4、 2の画像 2
    • Remove six 4.0 mm Philips #00 screws from the outside of the frame.

    • Remove five 3.0 mm Philips #00 screws from the outside of the frame.

    • Remove the one 3.0 mm Philips #00 screw hidden under the circuit board.

  5. HP Pavilion 13-P110NR Screen Replacement: 手順 5、 1の画像 1
    • Remove the band that is attached to the circuit board, located on the right side.

  6. HP Pavilion 13-P110NR Screen Replacement: 手順 6、 1の画像 1
    • Lift the frame and attached hardware from two corners of the frame.

    • Remove the frame from the device.

  7. HP Pavilion 13-P110NR Screen Replacement: 手順 7、 2の画像 1 HP Pavilion 13-P110NR Screen Replacement: 手順 7、 2の画像 2
    • Remove the tape located at the top of the frame.

    • Remove the bands from underneath the tape.

  8. HP Pavilion 13-P110NR Screen Replacement: 手順 8、 2の画像 1 HP Pavilion 13-P110NR Screen Replacement: 手順 8、 2の画像 2
    • Use the spudger to lift the case, which is attached at four spots by pegs.

    • Remove the metal cover and layers of film.

  9. HP Pavilion 13-P110NR Screen Replacement: 手順 9、 1の画像 1
    • Use the spudger to gently lift up the screen.

    • There are two layers, go under the bottom layer.

  10. HP Pavilion 13-P110NR Screen Replacement: 手順 10、 1の画像 1
    • After you get some space at the top of the screen, proceed by using a thin board to gently remove the screen from the frame.

終わりに

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

作成者

2人の作成者と共同で作成されました。

Matthew "Cole" Corson

メンバー登録日: 01/18/18

727 ポイント

5のガイドは作成済み

チーム

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 8

今までの合計 420