メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

はじめに

If you are experiencing distorted or inaudible sound from your GPS device, use this guide to replace a defective speaker in your Garmin NUVI 2589LMT device. Please be aware that soldering is required to replace the speaker.

  1. Using the T5 Torx Screwdriver, remove all 4 of the 5.7mm screws from the back of the device.
    • Using the T5 Torx Screwdriver, remove all 4 of the 5.7mm screws from the back of the device.

  2. Using the plastic opening tools, pry the shorter sides of the device apart. Once a gap has formed at the top of the device, insert the opening tool into the gap and slide it along the top of the device. Repeat for the bottom edge of the device to separate the LCD screen from the back.
    • Using the plastic opening tools, pry the shorter sides of the device apart.

    • Once a gap has formed at the top of the device, insert the opening tool into the gap and slide it along the top of the device. Repeat for the bottom edge of the device to separate the LCD screen from the back.

    • Do not disconnect or tear the ribbon wiring, located at the bottom of the motherboard, when removing the back of the device.

  3. 全てのタブを開く

    Mac用RAMアップグレードキット

    キット商品を見る

    どれだけタブを開いても
    十分に足りるRAM容量

    キット商品を見る
  4. Wedge the speaker from the device, using the small plastic opening tool.
    • Wedge the speaker from the device, using the small plastic opening tool.

    • The speaker is held in place by adhesive tape on the outer rim. Because the speaker is still connected to the motherboard, pry the speaker away from the device gently.

  5. Using tweezers, remove the tape covering the speaker connection to the motherboard.
    • Using tweezers, remove the tape covering the speaker connection to the motherboard.

  6. Using a soldering iron, desolder the wire connection at the soldering points between the speaker and the motherboard to remove.
    • Using a soldering iron, desolder the wire connection at the soldering points between the speaker and the motherboard to remove.

    • Learn more about soldering and desoldering connections here.

終わりに

To reassemble your device, follow these instructions in reverse order.

Adam Ferraro

メンバー登録日: 2016年10月04日

920 ポイント

8のガイドは作成済み

チーム

USF Tampa, Team 1-2, Nance Fall 2016 USF Tampa, Team 1-2, Nance Fall 2016人のメンバー

USFT-NANCE-F16S1G2

4 メンバー

8のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 1

今までの合計 227