メインコンテンツにスキップ

Fujifilm FinePix Z1 LCD Screen Replacement

必要な工具と部品

  1. Fujifilm FinePix Z1 LCD Screen Replacement, LCD Screen: 手順 1、 1の画像 1
    • Ensure that the camera is charged and not on PowerSave mode.

    • If the camera is charged and on, a faulty LCD Screen could be caused by a scratch or water damage. Also, trauma to the camera could cause the screen to shatter. In any of these cases, the screen will need to be replaced.

    • Make sure that the orange thin cable is appropriately attached.

  2. Fujifilm FinePix Z1 LCD Screen Replacement: 手順 2、 3の画像 1 Fujifilm FinePix Z1 LCD Screen Replacement: 手順 2、 3の画像 2 Fujifilm FinePix Z1 LCD Screen Replacement: 手順 2、 3の画像 3
    • Open the camera by removing the 5 external 4.0 mm screws with the 1.0 flathead.

  3. Fujifilm FinePix Z1 LCD Screen Replacement: 手順 3、 2の画像 1 Fujifilm FinePix Z1 LCD Screen Replacement: 手順 3、 2の画像 2
    • Gently pull the components apart.

    • Remove the 2.0mm screw to the left of the SD card.

    • The LCD screen is located on the back of the circuit board and can be accessed after removing the internal components.

  4. Fujifilm FinePix Z1 LCD Screen Replacement: 手順 4、 3の画像 1 Fujifilm FinePix Z1 LCD Screen Replacement: 手順 4、 3の画像 2 Fujifilm FinePix Z1 LCD Screen Replacement: 手順 4、 3の画像 3
    • Use the PH00 to pry open the display screen of the camera.

    • Expose the display screen and make sure the cable connecting the screen and the camera are separated. Remember where the cable connection is located to attach the replacement screen.

    • Use the How to Solder and Desolder Connections Guide to remove the screen from the device.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

2人の作成者と共同で作成されました。

Carra

メンバー登録日: 01/30/18

533 ポイント

4のガイドは作成済み

チーム

Baylor, Team S2-G4, Johnson Spring 2018 Baylor, Team S2-G4, Johnson Spring 2018人のメンバー

BU-JOHNSON-S18S2G4

3 メンバー

8のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 1

過去 7 日: 4

過去 30 日: 15

今までの合計 284