修理を始めるには コミュニティ ストア

Ematic EGQ307 Battery Replacement

はじめに

If your battery is no longer charging or holding a charge you may need to replace it, in this guide you will learn exactly how to replace the battery in your tablet.

必要な工具と部品

  1. Ematic EGQ307 Battery Replacement, Battery: 手順 1、 2の画像 1 Ematic EGQ307 Battery Replacement, Battery: 手順 1、 2の画像 2

    • There are two screws on the side with the micro USB power port. Remove the two 2mm x 0.5mm screws with a Phillips #0 Screwdriver head.

    編集

  2. Ematic EGQ307 Battery Replacement: 手順 2、 2の画像 1 Ematic EGQ307 Battery Replacement: 手順 2、 2の画像 2

    • Pry off the plastic backing with the spudger and the plastic opening tools. Anything that can provide enough leverage and not conduct electricity will also work for this purpose.

    • Carefully separate the front and back plates because the wire that connects the speaker is connected to both the front and back plates.

    編集

  4. Ematic EGQ307 Battery Replacement: 手順 3、 1の画像 1

    • 3. Once you pry off the plastic backing, you will expose the battery.

    • Carefully separate the front and back plates because the wire that connects the speaker is connected to both the front and back plates

    編集

  5. Ematic EGQ307 Battery Replacement: 手順 4、 3の画像 1 Ematic EGQ307 Battery Replacement: 手順 4、 3の画像 2 Ematic EGQ307 Battery Replacement: 手順 4、 3の画像 3
    この手順で使用する道具：
    Plastic Cards
    $2.99
    購入する

    • 4. Remove the tape holding the battery to the plastic frame. The battery is glued to the back of the LED. Pry the battery off the LED using a plastic card.

    • Do not bend or warp the battery. Even though the battery may not be working, it is still dangerous.

    編集

  6. Ematic EGQ307 Battery Replacement: 手順 5、 1の画像 1

    • If replacing the battery, unplug the black and red wires gently from the hardware and take off the battery .

    • If not replacing it, do not disconnect the red and black wires.

    • If replacing the battery, you will need a soldering kit to reconnect the wires with the new battery after disconnecting the old battery.

    • How To Solder and Desolder Connections.

    編集
終わりに

To reassemble your device, follow these instructions in reverse order. Note, you need to solder the battery wires onto the motherboard.

2 の人々がこのガイドを完成させました。

作成者

5人の作成者と共同で作成されました。

Othman

メンバー登録日: 07/21/15

267 ポイント

1ガイドが承認済み

バッジ: 10

+7 個以上のバッジ

チーム

Eastern Washington University, Team 1-1, Rowley SU 2015 Eastern Washington University, Team 1-1, Rowley SU 2015人のメンバー

EWU-ROWLEY-SU15S1G1

4 メンバー

10のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 4

今までの合計 5,079