修理を始めるには コミュニティ ストア

DualShock 3 Rear Cover Replacement

はじめに

Use this guide to remove the rear cover of a DualShock 3 controller.

必要な工具と部品

  1. DualShock 3 Rear Cover Replacement, Rear Cover: 手順 1、 1の画像 1

    • Remove the five 7.2 mm Phillips screws securing the rear cover to the controller.

    編集

  3. DualShock 3 Rear Cover Replacement: 手順 2、 1の画像 1

    • Press on the rear cover between the analog sticks and slightly lift the lower edge of it away from the rest of the controller.

    編集

  4. DualShock 3 Rear Cover Replacement: 手順 3、 2の画像 1 DualShock 3 Rear Cover Replacement: 手順 3、 2の画像 2

    • Push the rear cover slightly toward the top edge of the controller to clear the front edge of the #2 triggers.

    • Pull the rear cover away from the rest of the controller, being careful not to pop off the #2 triggers.

    • If you happen to accidentally pop off the trigger buttons, we have a trigger button guide to reattach them.

    編集
終わりに

To reassemble your device, follow these instructions in reverse order.

24 の人々がこのガイドを完成させました。

作成者

9人の作成者と共同で作成されました。

Andrew Bookholt

586,263 ポイント

619のガイドは作成済み

バッジ: 47

+44 個以上のバッジ

3 件のコメント

i have a different dualshock 3 than yours. mine is built in a different way and has a different battery

MasterKlaus Produtions (Swe0b) - 返信

Sony did that throughout the Dualshock 3’s production as they found out what would cause them to malfunction and fixed the issue. It should be alright as long as you are able to replace the battery when needed.

Aiodensghost -

iran:

نحوهی تعویض طلق دسته پلی سه هم بذارین. لطفان

مجید محمدی - 返信

コメントを追加

統計データ:

過去 24時間: 1

過去 7 日: 14

過去 30 日: 70

今までの合計 23,787