メインコンテンツにスキップ

この修理ガイドは変更されています。最新の未承認バージョンに切り替えます。

Disassembling iPhone 4S Battery

アーカイブされたガイド
このガイドは将来的な使用のためにのみ保存されてます。ご自身の修理作業には更新バージョンをご利用ください。

必要な工具と部品

  1. Disassembling iPhone 4S Battery, Disassembling iPhone 4S Battery: 手順 1、 1の画像 1
    • Using a 5-point pentalobe screwdriver, unscrew the 2 pentalobe on the bottom of the phone near the dock connector.

  2. Disassembling iPhone 4S Battery: 手順 2、 1の画像 1
    • Push the back glass towards the top of the phone.

  3. Disassembling iPhone 4S Battery: 手順 3、 1の画像 1
    • Using a #000 Phillips screwdriver, unscrew the 2 very small Phillips screws.

  4. Disassembling iPhone 4S Battery: 手順 4、 2の画像 1 Disassembling iPhone 4S Battery: 手順 4、 2の画像 2
    • Using a plastic opener tool, pry up the battery connector shield. Be careful not to lose the smaller antenna connector shield under the top connector sheild.

    • Using a plastic opener tool, pry up the battery connector.

  5. Disassembling iPhone 4S Battery: 手順 5、 1の画像 1
    • Pull upwards on the plastic tab. If it's the first time, you may have to use the plastic pry tool on the outside (right) edge of the battery to loosen battery first.

    • Then, out pops the battery.

終わりに

To reassemble your device, follow these instructions in reverse order.

3 の人々がこのガイドを完成させました。

作成者

10人の作成者と共同で作成されました。

Chandler Skinner

メンバー登録日: 10/15/11

3,710 ポイント

6のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 5,975