修理を始めるには コミュニティ ストア

Disassembling Speak And Spell Case

必要な工具と部品

  1. Disassembling Speak And Spell Case, Case: 手順 1、 2の画像 1 Disassembling Speak And Spell Case, Case: 手順 1、 2の画像 2

    • Flip the toy over, so that the keypad is facing away from you.

    • Remove two Phillips-head screws.

    • Insert a plastic spudger (or 4!) into the marked holes, and push down and towards the edge to release each catch.

    • It's possible to release each catch one-at-a-time, but easier if you have 4 tools and do them simultaneously.

    • This requires quite a bit of force; be careful.

    編集

  3. Disassembling Speak And Spell Case: 手順 2、 1の画像 1

    • Separate the two halves of the case to expose the inner PCB, speaker and battery holder.

    編集
終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

bushing

メンバー登録日: 04/23/10

10,247 ポイント

13のガイドは作成済み

バッジ: 43

+40 個以上のバッジ

コメント 1 件

I got one of these. I've opened the case and the battery connections are silver and show no corrosion at all. I replaced the batteries, swapped out one of the Word Modules. I got a bit of static once, but now nothing. All the wire connection soldering looks fine. Any ideas?

stevehelium@gmail.com

Stephen Henderson - 返信

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 6

過去 30 日: 14

今までの合計 4,960