メインコンテンツにスキップ

Dell Latitude E5450 Lower Case Replacement

必要な工具と部品

  1. Dell Latitude E5450 Lower Case Replacement, Unscrew the Lower Case: 手順 1、 1の画像 1
    この手順で使用する道具:
    Magnetic Project Mat
    $19.95
    購入する
    • Remove the six Philips #0 screws from the lower case.

    • These screws are all 5.6 mm long, but it's still a good idea to keep track of them and make sure they go back in their proper holes!

  2. Dell Latitude E5450 Lower Case Replacement: 手順 2、 1の画像 1
    • This photo shows the location of the ten clips that hold the lower case in place. Take note of the location of the clips, and refer back to this step if your lower case gets stuck during removal.

    • Four clips hold the upper half of the case in place and can be released by prying around them with a spudger.

    • The other six clips along the bottom edge can not be released by prying at them. Instead, they come free by sliding the whole case upward, as shown in step 5 below.

  3. Dell Latitude E5450 Lower Case Replacement: 手順 3、 2の画像 1 Dell Latitude E5450 Lower Case Replacement: 手順 3、 2の画像 2
    • Insert the flat edge of a spudger into the small divot along the top edge of the case, just below the docking station port.

    • Pry up to release the two central clips along the upper edge of the case.

  4. Dell Latitude E5450 Lower Case Replacement: 手順 4、 3の画像 1 Dell Latitude E5450 Lower Case Replacement: 手順 4、 3の画像 2 Dell Latitude E5450 Lower Case Replacement: 手順 4、 3の画像 3
    • Use your spudger to pry up the remaining clips along the top edge.

  5. Dell Latitude E5450 Lower Case Replacement, Remove the Lower Case: 手順 5、 3の画像 1 Dell Latitude E5450 Lower Case Replacement, Remove the Lower Case: 手順 5、 3の画像 2 Dell Latitude E5450 Lower Case Replacement, Remove the Lower Case: 手順 5、 3の画像 3
    • Slide the lower case upward and remove it.

  6. Dell Latitude E5450 Lower Case Replacement: 手順 6、 2の画像 1 Dell Latitude E5450 Lower Case Replacement: 手順 6、 2の画像 2
    • When reinstalling the lower case, make sure you slide the bottom edge (the edge without the cutout) into place first before snapping the rest of the clips shut.

終わりに

To reassemble your device, follow these instructions in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Check out our Dell Latitude answers community for troubleshooting help.

作成者

1人の作成者と共同作成されました。

Taylor Dixon

メンバー登録日: 06/26/18

67,227 ポイント

94のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 5

過去 30 日: 18

今までの合計 1,513