はじめに

A guide on how to remove the Palm Rest.

  1. Turn the laptop bottom side up with the rear panel facing forward.
    • Turn the laptop bottom side up with the rear panel facing forward.

  2. Remove the two T8 Torx screws that secure the LED cover to the base enclosure.
    • Remove the two T8 Torx screws that secure the LED cover to the base enclosure.

  3. Turn the laptop top side up with the front facing forward. Open the screen.
    • Turn the laptop top side up with the front facing forward. Open the screen.

  4. Locate the F1 and F2 keys near the top left corner of the keyboard.
    • Locate the F1 and F2 keys near the top left corner of the keyboard.

  5. While holding the F1 and F2 keys, insert a spudger between the keys into the notch in the LED cover. Lift up.
    • While holding the F1 and F2 keys, insert a spudger between the keys into the notch in the LED cover. Lift up.

  6. Locate the Pause and Scroll keys near the top right corner of the keyboard.
    • Locate the Pause and Scroll keys near the top right corner of the keyboard.

  7. Free shipping on all orders over $100.00 or containing a Pro Tech Toolkit!

    当社のショップを閲覧する
  8. While holding the Pause and Scroll keys, insert a spudger between the keys into the notch in the LED cover. Lift up.
    • While holding the Pause and Scroll keys, insert a spudger between the keys into the notch in the LED cover. Lift up.

  9. Insert a spudger between the F7 and F8 keys. Lift up to remove the LED cover. Insert a spudger between the F7 and F8 keys. Lift up to remove the LED cover.
    • Insert a spudger between the F7 and F8 keys. Lift up to remove the LED cover.

  10. Lift the back edge of the keyboard and pull towards the screen.
    • Lift the back edge of the keyboard and pull towards the screen.

  11. Pull the cable and lift up to release.
    • Pull the cable and lift up to release.

  12. Remove the keyboard.
    • Remove the keyboard.

  13. Flip the computer bottom side up with the rear facing forward.
    • Flip the computer bottom side up with the rear facing forward.

  14. Remove the six screws shown in picture.
    • Remove the six screws shown in picture.

  15. Remove battery and then remove screw in  metal support on case edge
    • Remove battery and then remove screw in metal support on case edge

    • Flip the computer top side up with the front facing you.

  16. Lift up the palm rest from the front edge and swing it towards the screen.
    • Lift up the palm rest from the front edge and swing it towards the screen.

  17. Locate the first connector. Disconnect by firmly pulling up.
    • Locate the first connector. Disconnect by firmly pulling up.

  18. Locate the second connector. Remove by firmly pulling up.
    • Locate the second connector. Remove by firmly pulling up.

  19. Remove the palm rest.
    • Remove the palm rest.

まとめ

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Alex Hernandez

メンバー登録日: 2010年04月14日

28 ポイント

4のガイドは作成済み

チーム

Cal Poly, Team 29-74, Johann Spring 2010 Cal Poly, Team 29-74, Johann Spring 2010人のメンバー

CPSU-JOHANN-S10S29G74

3 メンバー

7のガイドは作成済み

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 2,858