メインコンテンツにスキップ

はじめに

Speaker not turning on? This guide will help you replace the battery of the Bose Soundlink Mini II.

  1. Flip the speaker over onto its back. Flip the speaker over onto its back.
    • Flip the speaker over onto its back.

  2. Gently remove the rubber base from speaker by pulling around the edges. Gently remove the rubber base from speaker by pulling around the edges.
    • Gently remove the rubber base from speaker by pulling around the edges.

  3. Remove the four 6mm T9 Torx bit screws from the corners of the battery. Remove the four 6mm T9 Torx bit screws from the corners of the battery.
    • Remove the four 6mm T9 Torx bit screws from the corners of the battery.

  4. Gently remove the battery from the speaker. Gently remove the battery from the speaker. Gently remove the battery from the speaker.
    • Gently remove the battery from the speaker.

まとめ

To reassemble your device, follow these instructions in reverse order.

9 の人々がこのガイドを完成させました。

Devon

メンバー登録日: 2017年02月15日

353 ポイント

2のガイドは作成済み

チーム

USF Tampa, Team 5-2, Passmore Spring 2017 USF Tampa, Team 5-2, Passmore Spring 2017人のメンバー

USFT-PASSMORE-S17S5G2

4 メンバー

5のガイドは作成済み

3 Contributors and none of them know how to remove the battery, brilliant... Honestly if you want to do this right, do it right from the begining. The battery is connected with a cable to the device, please explain how did you remove it properly.

Timo Bernhard - 返信

Hey Timo,

no, there are just two different battery versions of the Soundlink Mini 2: One without a cable from the battery to the PCB (as shown in this tutorial, i think this is the older version of the Soundlink Mini2) and one with a cable...

I have one here with a cable and I?m desperate to find a new battery for it but can`t find it anywhere on the net... I`m thinking of trying a battery without the cables and try to connect four cables to the battery and then solder them to the PCB...

Christoph Jeschke -

But how do I disconnect the battery having a cable?! - That’s actually the hard part.

Thomas Amsler - 返信

You will have to take out the mesh on front and back. Then take out screws on speakerssside. The smalle print can be taken out then and you have to solder the battery. Just done this, and not a easy job.

Onno -

If you have the Soundlink  Mini 2, you can send the battery to Bose and they will rebuild it for $75. It is not user replaceable, although if you are electronics savvy you can remove it.

Problem is there are no replacements out there, and these batteries have a control board soldered to the battery with a ribbon cable. This will require soldering and unsoldering if there was a battery replacement for it. This also requires taking the entire Soundlink Mini 2 speaker apart to remove the board and battery.

If you send the battery to Bose expect a 3 to 6 week turn around for a return, which includes about 10 business days of shipping both ways as its a Lithium battery and can only travel ground. Plus the $75 for the repair as mentioned earlier.

They really did a wonderful job in limiting your options on this item.

Bose Hold this L for us as in Losers!

Bronx - 返信

コメントを追加する

統計データを表示:

過去 24時間: 66

過去 7 日: 490

過去 30 日: 1,768

今までの合計 32,294