Bose Quiet Comfort 35 II Audio Jack Connector Replacement

はじめに

Sometimes Bose QuietComfort 35 II (Model:789564-0010) users complain about intermittent audio input when the audio jack cable is moved. This can be a sign of a bad audio jack connector. This guide details the removal and replacement of the stereo jack connector. If a new audio jack is added the following guide on soldering may be helpful:

はんだ付けとはんだ除去の作業ガイド

必要な工具と部品

手順1 Audio Jack Cable Connector

Bose Quiet Comfort 35 II Audio Jack Connector Replacement, Audio Jack Cable Connector: 手順 1、 1の画像 1

Take off ear cushion pad using the plastic opening tool. Pry until you notice the seam of the ear cushion separates from the plastic tabs.

編集

手順2

Bose Quiet Comfort 35 II Audio Jack Connector Replacement: 手順 2、 3の画像 3

Take off the ear cover by peeling off the glue with hands.

編集

手順3

Remove the two 7-millimeter silver screws from the inside by using the Phillips #000 screwdriver to disconnect the back cover.

編集

手順4

Remove the two 5-millimeter silver screws attaching the earphones to the headband using the Phillips #000 screwdriver.

編集

手順5

Detach the earpiece form the band using the flat part of the metal spudger.
Slide the joint at the end of the headphone band out to release ear piece.

編集

手順6

Detach the silver cover on the outside of the headset using the spudger.
Pry until you hear a distinct pop; this indicates the cover has separated from its base.

編集

手順7

Solder off the ribbon cable from the driver near the cable connector port to detach it.

編集

手順8

Replace the cable connector with spare driver/audio jack combo.
Optional: desolder the five audio jack posts seen here, and replace individual audio jack.

編集