Blu Grand M2 Charging Port Assembly Replacement

はじめに

This guide was made to help you if you are experiencing a BLU GRAND M2 charging failure. This guide will help you replace the charging port for the BLU GRAND M2.

In order to follow this guide, you will need to solder. Check out the How to Solder and Desolder Connections guide before you start if you are unfamiliar or need a refresher. Also be sure to power off the phone before beginning your repair.

必要な工具と部品

手順1 Charging Port Assembly

Blu Grand M2 Charging Port Assembly Replacement, Charging Port Assembly: 手順 1、 1の画像 1

Remove the screws with the T2 Torx screwdriver.
Place screws off to the side.

編集

手順2

Once the Torx screws have been removed, use a pry tool and a suction tool to remove the back plate.
Using the T2 Torx screwdriver, remove the six Torx screws on the motherboard.
Make sure to disconnect all other connections from the camera.

編集

手順3

Carefully pry the motherboard assembly from the phone.
The charging port assembly is soldered to the motherboard piece. Remove the port with a soldering iron.
Once you have removed the faulty port, replace it with the new port. Attach the new charging port with the soldering iron.
After installing the new port, repeat the steps in reverse order to reassemble the phone.
How to Solder and Desolder Connections