1. As the device base is firmly clipped, insert two metal spudgers to gently release the first clips.
    • As the device base is firmly clipped, insert two metal spudgers to gently release the first clips.

    コメントを追加する

  2. Continue releasing the last plastic clips with your hands taking care not to break any of the plastic elements attached to the base.
    • Continue releasing the last plastic clips with your hands taking care not to break any of the plastic elements attached to the base.

    コメントを追加する

  3. Fixmasのスピリットを広めましょう
    クーポンコードFIXMAS12を使えば、50ドル以上のお買い上げで12ドル割引となります。
    Fixmasのスピリットを広めましょう
    クーポンコードFIXMAS12を使えば、50ドル以上のお買い上げで12ドル割引となります。
    • Use a philips screwdriver to remove the metal heat sink.

    コメントを追加する

    • The logic board is held in place by the power supply connector, but that's no problem for our spudger. A quick flick and the logic board is free.

    コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

7 の人々がこのガイドを完成させました。

Vincent Monteil

メンバー登録日: 2013年07月06日

6,197 ポイント

19のガイドは作成済み

Where can I find a 3rd Generation Apple TV Logic Board?

Ricky Vaughn - 返信

Good question! Did you manage to find a replacement?

Nathan Bugeja -

Hi my wifi and athernet is not working in apple tv on screen it showing your apple tv is connected to local network its not connect to internet now how should i repair this

Mohamed Iqbal Sayyed - 返信

Mine too, where could I find a logic board replacement???

Juan Ignacio Gutierrez -

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 10

過去 30 日: 47

今までの合計 7,155