Afterglow Wireless PS3 Controller Battery Replacement

はじめに

Replacing the battery in a PS3 Wireless Afterglow Controller requires the removal of the back plate and then the soldering of the battery wires onto the motherboard.

必要な工具と部品

手順1 Back Cover

Afterglow Wireless PS3 Controller Battery Replacement, Back Cover: 手順 1、 2の画像 1

Afterglow Wireless PS3 Controller Battery Replacement, Back Cover: 手順 1、 2の画像 2

Lay the controller face down on a flat surface and remove the seven 9mm Phillips #0 screws on the back of the controller.
Lift up and remove the controller back plate.

編集

手順2 Battery

Afterglow Wireless PS3 Controller Battery Replacement, Battery: 手順 2、 1の画像 1

Carefully remove the battery by lifting it straight up from its place.
Keep in mind that the red and black battery wires are attached to the motherboard. Handle these with care.

編集

手順3

Use the soldering tool to heat the solder connecting the battery wires to the motherboard.
The soldering gun will loosen the bonds of the solder allowing the wires to be detached. Use this guide for further details on how to solder.