Acer Swift X N20C12 SSD (Solid State Drive) Replacement

はじめに

This guide shows how to replace the SSD in an Acer Swift X N20C12. The SSD is the storage device of the laptop. Its form factor is 2280 M.2.

You may want to replace your SSD if your current one is suffering performance issues or corruption from reaching its end of life (SSDs can only be read from/written to a limited number of times).

When replacing your SSD make sure to backup the data that was on the old one, since the new one will be blank.

必要な工具と部品

手順1 Lower Case

Acer Swift X N20C12 SSD (Solid State Drive) Replacement, Lower Case: 手順 1、 1の画像 1

Use a T5 Torx screwdriver to remove the eleven screws that secure the lower case.

編集

手順2

Insert an opening pick in the seam between the lower case and chassis.
Slide the pick around the perimeter while prying until the lower case releases.
Remove the lower case.

編集

手順3 SSD

Acer Swift X N20C12 SSD (Solid State Drive) Replacement, SSD: 手順 3、 1の画像 1

The SSD is located to the right of the battery.

編集

手順4

Use a Phillips screwdriver end to remove the 5 mm screw that secures the SSD.

編集

手順5

Gently remove the SSD from the computer by pulling it straight out of its motherboard socket.

編集

終わりに

To reassemble your device, follow the above steps in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting or ask our Answers community for help.