メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

はじめに

A guide on how to replace the touchscreen on a Acer Aspire V5-571P-6815 laptop.

  1. Turn off the computer and unplug all power.
    • Turn off the computer and unplug all power.

  2. Slide the locking latch to the right and hold while pulling the battery out with your other hand. Slide the locking latch to the right and hold while pulling the battery out with your other hand.
    • Slide the locking latch to the right and hold while pulling the battery out with your other hand.

  3. Insert a plastic opening tool between the screen and lid. Work the plastic opening tool around the perimeter while prying upwards until the screen separates from the lid.
    • Insert a plastic opening tool between the screen and lid.

    • Work the plastic opening tool around the perimeter while prying upwards until the screen separates from the lid.

  4. Lay the screen flat down on the keyboard.
    • Lay the screen flat down on the keyboard.

  5. Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits

    Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits
  6. Remove the camera using a pair of blunt nose tweezers. Peel up the adhesive tape keeping the camera's cable tied down.
    • Remove the camera using a pair of blunt nose tweezers.

    • Peel up the adhesive tape keeping the camera's cable tied down.

  7. Remove the microphone from the motherboard with a pair of blunt nose tweezers. Slide out the adhesive tape securing the microphone cable.
    • Remove the microphone from the motherboard with a pair of blunt nose tweezers.

    • Slide out the adhesive tape securing the microphone cable.

  8. Lift up the ribbon cable contained by the adhesive strip with blunt nose tweezers. This will allow you to access the two black digitizer ribbons. Use a spudger to flip up the retaining flap on the digitizer ribbon cable ZIF socket.
    • Lift up the ribbon cable contained by the adhesive strip with blunt nose tweezers.

    • This will allow you to access the two black digitizer ribbons.

    • Use a spudger to flip up the retaining flap on the digitizer ribbon cable ZIF socket.

    • Pull the ribbon cables out of their sockets.

  9. Remove the board form the laptop. Remove the board form the laptop.
    • Remove the board form the laptop.

  10. Use the blunt nose tweezers to peel up the adhesive on the display cable. Pull on the adhesive tape to disconnect the display from the motherboard.
    • Use the blunt nose tweezers to peel up the adhesive on the display cable.

    • Pull on the adhesive tape to disconnect the display from the motherboard.

  11. Lift the whole strip connected to the circuit board and  LCD connector. Place the strip to the side where it is not in contact with the screen. Remove the whole screen from the device.
    • Lift the whole strip connected to the circuit board and LCD connector. Place the strip to the side where it is not in contact with the screen.

    • Remove the whole screen from the device.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Brianna Sinder

メンバー登録日: 2018年04月12日

377 ポイント

2のガイドは作成済み

チーム

UW Tacoma, Team S1-G4, Liner Spring 2018 UW Tacoma, Team S1-G4, Liner Spring 2018人のメンバー

UWT-LINER-S18S1G4

5 メンバー

4のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 4

過去 7 日: 18

過去 30 日: 78

今までの合計 1,188