メインコンテンツにスキップ

iMac Intel 27インチ EMC 2309 (Late 2009, Core 2 Duo 3.06もしくは3.33 GHz) ID iMac10,1, EMC 2374 (Late 2009, Core i5 2.66 GHzもしくは Core i7 2.8 GHz) ID iMac11,1

467回答 すべてを表示

Won't boot after spinning wheel

Everytime I start up my intel based iMac, it gets as far as the spinning wheel with the apple logo above it on the grey screen. Then just freezes. I've tried resetting the pram and multiple other ways of starting up the iMac.

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア -1
1件のコメント

Boot from install/hardware test disk? Chimes or flashing lights? Beeps? What was the last thing you did before this started happening?

さんによる

コメントを追加

1 件の回答

ベストアンサー

I would suspect your hard drive is failing.

Option #1 You could just boot from the OSX disc and run Disk Utility to check the drive's SMART status. That may or may not show a problem with the drive.

Option #2 If you have a spare USB hard drive you can connect it and boot from your OSX install disc. Install the OS on the USB drive which you should be able to then boot from. From there I would download a free program called SMART utility and see if that shows the drive as FAILING.

There's a possibility the OS just needs to be reinstalled but you really don't want to try reinstalling it until you know if the drive is OK first.

Hope you have backups :-)

このアンサーは役に立ちましたか?

スコア 2

1件のコメント:

... or Firewire external HD

さんによる

コメントを追加

回答を追加する

Bradley Little さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 1,935