評価: 13
1
I received my soldering kit with power station a couple of weeks ago and when I first charged the power station with the display working well enough. Today I wanted to start soldering, but the display won't turn on. I'm able to see the power station in the web console and updated it to the latest FW without issues. The battery is shown to be at 100%.
However the display is still not functioning. Any help/tips appreciated.
評価: 280.3千
19
10
2千
@petrihayry84738 , sorry this is happening. Please reach out to our support team here, so that we can get this resolved.
このアンサーは役に立ちましたか？
過去 24時間: 0
過去 7 日: 5
過去 30 日: 17
今までの合計 47
Check If the Display Is in “Auto-Sleep” Mode
Some FixHub models automatically turn off the screen after a few minutes to save power.
Try pressing and holding the power button for 2–3 seconds.
If your model has a “Display” or “Light” button, press it briefly — that often wakes the LCD.
Plug a device into a USB or DC output to “wake” the s
Aashok Kumar Sharma さんによる
Thanks for the tip Aashok, but pressing the power button doesn't do anything. Also no Light or Display buttons on mine unfortunately.
When I plug it in to USB (A or C/PD) or my charging block, nothing happens on the display. My phone is charging though so it's clearly on and also gets recognized in the web console.
Petri Hayrynen さんによる
@petrihayry84738 - I've forward your issue to the iFixit product staff to see what they say. Hang tight!
DanJ さんによる